Canon imageCLASS MF4690 Reference Manual page 232

Before Using the
Machine 1
Restricting the USB Interface Port
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
You can specify whether to accept or reject jobs by restricting
the connection to the USB port.
The only USB port to which you can restrict the connection is the one on
the back of the machine. You can use a USB memory connected to the USB
port on the front of the machine regardless of this setting.
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <SYSTEM
SETTINGS>, then press [OK].
If the System Manager ID and System Password have been set, enter
the System Manager ID and System Password using the numeric
keys, then press [Log In/Out (ID)].
3.
Press [ ] or [ ] to select <USE DEVICE USB>,
then press [OK].
4.
Press [ ] or [ ] to select <ON> or <OFF>,
then press [OK].
<ON>: The machine accepts jobs through the USB port.
<OFF>: The machine does not accept jobs through the USB port.
5.
Press [Stop/Reset] to return to the standby
mode.
6.
Restart the machine.
Back Previous Next
TOP
8-22