Canon imageCLASS MF4690 Reference Manual page 330

Before Using the
Machine 1
TX/RX SETTINGS
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
4. RX SETTINGS
1. ECM RX
2. FAX/TEL OPT. SET
1. RING START TIME
2. F/T RING TIME
3. F/T SWITCH ACTION
3. DRPD:SELECT FAX
4. INCOMING RING
ON
Sets the reception features.
Sets whether the ECM (Error Correction Mode) reception is activated.
– ON
– OFF
Sets the optional items in the <FaxTel> mode. (See "FaxTel: Optional Settings," on p. 4-36.)
Sets the time the machine takes to check whether a call is a fax or a voice call. (0SEC–30SEC)
Selects the ring length for voice calls. (15SEC–300SEC)
Selects whether the machine switches to the receive mode after the ring time has elapsed, or
whether if disconnects the call.
– RECEIVE
– DISCONNECT
Selects the ring pattern for fax calls.
– DOUBLE RING
– SHORT-SHORT-LONG
– SHORT-LONG-SHORT
– OTHER RING TYPE
– NORMAL RING
Sets whether the external telephone rings when the machine receives a fax. This function is only
available when the <RX MODE> is set to <FaxOnly> or <FaxTel>.
The telephone rings when the machine receives a fax if an external telephone is connected.
Back Previous Next
TOP
11-17