Canon imageCLASS MF4690 Reference Manual page 118

Before Using the
Machine 1
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Printing Received Documents
■
The machine provides the following printing features: two-sided
printing and received image reduction.
Two-Sided Printing
You can print received documents on both sides of the paper.
You can print the received documents on both sides of the paper only
when <PAPER SIZE> is set to <LTR> or <A4>. The received documents are
printed on one side of the paper when <PAPER SIZE> is not set to <LTR> or
<A4>. (See "Setting Paper Size and Type, " on p. 2-13.)
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <TX/RX SETTINGS>,
then press [OK].
3.
Press [ ] or [ ] to select <TX/RX COMMON
SET.>, then press [OK].
4.
Press [ ] or [ ] to select <RX SETTINGS>,
then press [OK].
5.
Press [ ] or [ ] to select <TWO-SIDED
PRINT>, then press [OK].
Back Previous
6.
Press [ ] or [ ] to select <ON>, then press
[OK].
7.
Press [Stop/Reset] to return to the standby
mode.
Received Image Reduction
You can print received documents in a reduced size.
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <TX/RX SETTINGS>,
then press [OK].
3.
Press [ ] or [ ] to select <TX/RX COMMON
SET.>, then press [OK].
4.
Press [ ] or [ ] to select <RX SETTINGS>,
then press [OK].
5.
Press [ ] or [ ] to select <RECEIVE
REDUCTION>, then press [OK].
6.
Press [ ] or [ ] to select <ON>, then press
[OK].
TOP
Next
4-44