Canon imageCLASS MF4690 Reference Manual page 105

Before Using the
Machine 1
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <TX/RX SETTINGS>,
then press [OK].
3.
Confirm that <TX/RX COMMON SET.> is selected,
then press [OK].
4.
Press [ ] or [ ] to select <TX SETTINGS>,
then press [OK].
5.
Press [ ] or [ ] to select <SEND SETTINGS>,
then press [OK].
6.
Press [ ] or [ ] to select <TX FILE NAME>,
then press [OK].
7.
Use the numeric keys to enter the document's
name (up to 24 characters), then press [OK].
8.
Press [ ] or [ ] to select <SUBJECT>, then
press [OK].
9.
Use the numeric keys to enter the subject (up to
40 characters), then press [OK].
Back Previous
10.
Press [ ] or [ ] to select <MESSAGE TEXT>,
then press [OK].
11.
Use the numeric keys to enter the message body
text (up to 140 characters), then press [OK].
12.
Confirm that <REPLY-TO> is displayed, then
press [OK].
13.
Use the numeric keys to enter the reply-to
address (up to 120 characters), then press [OK].
14.
Press [ ] or [ ] to select <E-MAIL PRIORITY>,
then press [OK].
15.
Press [ ] or [ ] to select the priority
(<NORMAL>, <LOW> or <HIGH>), then press
[OK].
16.
Press [Stop/Reset] to return to the standby
mode.
TOP
Next
4-31