Canon imageCLASS MF4690 Reference Manual page 108

Before Using the
Machine 1
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
5.
Use the numeric keys to dial the country code,
the area code, and the fax/telephone number of
the recipient.
6.
If necessary, press [Recall/Pause] to enter a
pause at the end of the number.
- The letter <P> appears at the end of the fax number.
- Pauses entered at the end of fax numbers are always 10 seconds
long.
7.
Press [Start].
When you set the documents on the platen glass, press [
to select the document size, then press [Start] for each document.
When scanning is complete, press [OK] to start sending.
When <TIME OUT> is set to <ON> in <TX SETTINGS> in <FAX
SETTINGS> in <TX/RX SETTINGS>, and if you have specified the
destination by any other method than using numeric keys, the
machine starts scanning automatically without pressing [Start], after
the preset time for this setting is elapsed.
] or [ ]
Back Previous Next
TOP
4-34