Canon imageCLASS MF4690 Reference Manual page 44

Before Using the
Machine 1
Timer Settings
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Setting the Sleep Mode
■
When the machine remains idle for a certain period of time, it
automatically enters the Sleep mode.
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <TIMER SETTINGS>,
then press [OK].
3.
Press [ ] or [ ] to select <AUTO SLEEP
TIME>, then press [OK].
4.
Press [ ] or [ ] to select <ON>, then press
[OK].
5.
Press [ ] or [ ] to select the desired interval,
then press [OK].
You can set the interval from 3 to 30 minutes (in one-minute
increments).
You can also enter values using numeric keys.
The default setting is 5 minutes.
Back Previous
6.
Press [Stop/Reset] to return to the standby
mode.
- [Energy Saver] lights green when the machine enters the Sleep
mode.
- To resume the normal mode from the Sleep mode, press [Energy
Saver] on the operation panel.
- To enter the Sleep mode manually, press [Energy Saver] on the
operation panel.
- The machine will not enter the Sleep mode when:
• the machine is in operation
• the Processing/Data indicator lights or flashes
• a message appears on the display and the Error indicator flashes
• paper is loaded in the multi-purpose tray
• a paper jam occurs in the machine
• the handset of the external telephone is off the hook
- The machine will leave the Sleep mode when:
• you press [Energy Saver] on the operation panel
• a fax is received
• the handset of the external telephone is off the hook
• a print job is sent from a computer, and the print is started
TOP
Next
1-16