Canon imageCLASS MF4690 Reference Manual page 260

Before Using the
Machine 1
Clearing Jams
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
When < CHECK DOCUMENT>, <PAPER JAM/LIFT PANEL
TO OPEN>, <FEEDER PAPER JAM/CHECK THE FEEDER> or
<DOCUMENT TOO LONG> appears on the LCD display, remove
jammed paper from the machine first, then from the paper
cassette or multi-purpose tray if necessary. Check the following
if you experience repeated paper jams:
– Fan and tap the paper stack on a flat surface before loading it in
the machine.
– Check that the paper you are using meets the requirements for
use. (See "Paper Requirements, " on p. 2-7.)
– Make sure you have removed any scraps of paper from the inside
of the machine.
– When removing jammed documents or paper, take care not to
cut your hands on the edges of the document or paper.
Back Previous
– When removing jammed paper or when inspecting the inside of
the machine, do not allow necklaces, bracelets, or other metal
objects to touch the inside of the machine, as this may result in
burns or electrical shock.
– If you tear the paper, remove any torn pieces to avoid further
jams.
– If loose toner comes into contact with your skin or clothing, wash
with cold water. Warm water will set the toner.
Do not force a jammed document or paper out of the machine. Contact
Canon Customer Care Center if needed.
Document Jams
■
When <CHECK DOCUMENT>, <FEEDER PAPER JAM/CHECK THE
FEEDER> or <DOCUMENT TOO LONG> appears on the LCD display,
remove a jammed document from the ADF.
TOP
Next
10-3