Canon imageCLASS MF4690 Reference Manual page 302

Before Using the
Machine 1
Paper jams occur.
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
Copy is skewed.
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
A Make sure the scanning platform and rear cover are
fully closed. (See "Paper Jams, " on p. 10-5.)
Q Is the paper loaded correctly?
A Make sure the document is correctly loaded. (See "Set
Up the Machine, " in the Starter Guide.)
Q Is the correct type of paper loaded in the machine?
A Make sure you load paper that meets the
requirements for use. (See "Paper Requirements, " on
p. 2-7.)
Q Is the paper loaded correctly?
A Make sure the paper is correctly loaded in the
machine. (See "Set Up the Machine, " in the Starter
Guide.)
A Make sure the paper delivery slot is free of
obstructions.
Back
Copy is not clear.
Q Is the correct type of paper loaded in the machine?
A Make sure you load paper that meets the
requirements for use. (See "Paper Requirements, " on
p. 2-7.)
Q Are you copying on the wrong side of the paper?
A Some papers have a "right" side for copying. If the
copy quality is not as clear as you think it should be,
try copying on the other side of the paper.
Documents are copied in < CALENDAR TYPE> even if <BOOK TYPE> is
selected (or vice versa).
Q Are you copying the landscape oriented
documents?
A For the landscape oriented documents, the front and
back sides of the copy will have the opposite top-
bottom orientation when <BOOK TYPE> is selected.
When <CALENDAR TYPE> is selected, the front and
back side of the copy will have the same top-bottom
orientation. (See "Two-Sided Copying, " on p. 3-9.)
TOP
Previous Next
10-45