Canon imageCLASS MF4690 Reference Manual page 117

Before Using the
Machine 1
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
3.
Press [ ] or [ ] to select <FAX SETTINGS>,
then press [OK].
4.
Press [ ] or [ ] to select <RX SETTINGS>,
then press [OK].
5.
Press [ ] or [ ] to select <REMOTE RX>, then
press [OK].
6.
Press [ ] or [ ] to select <ON>, then press
[OK].
7.
Press [Clear] twice to delete the default remote
reception ID of 25.
8.
Use the numeric keys to enter a new remote
reception ID (a combination of two characters
using 0 to 9, and #), then press [OK].
9.
Press [Stop/Reset] to return to the standby
mode.
Back Previous
Receiving a Fax Remotely
1.
When you receive a call, pick up the external
telephone.
2.
Use the numeric keys to enter the two-digit
remote reception ID to start reception.
If the machine is set for pulse dialing, press [Tone] to switch to tone
dialing before pressing the remote reception ID.
3.
When the reception is complete, hang up the
telephone.
TOP
Next
4-43