Before Using the
Machine
1
ADJUST./CLEANING
Document and Paper
2
1. FIX.UNIT CLEANING
Copying
3
2. SPECIAL MODE T
Sending and
Receiving
4
Printing and
3. SPECIAL MODE U
Scanning
5
Network
6
Remote UI
7
System Manager
4. SPECIAL MODE V
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Setting Item
OFF
MODE1
MODE2
Cleans the fuser roller. (See "Fuser Roller," on p. 9-6.)
Sets whether to prevent blur from appearing on the printouts for copying, receiving info, and
reports.
When this setting is set to <ON>, the density of printouts may become light.
–
OFF
–
ON
Select to improve print quality in high temperature and high humidity conditions or in low
temperature and low humidity conditions.
Select in normal condition.
Select to improve print quality in low temperature and low humidity conditions, or when using
thick paper or an envelope.
Select to improve print quality in high temperature and high humidity conditions.
Sets whether to prevent small size paper (B5, A5, EXECUTIV, etc) from being curled.
–
OFF
–
ON
Back
Previous
Next
Description
TOP
11-30