Printing Problems - Canon imageCLASS MF4690 Reference Manual

Before Using the
Machine 1

Printing Problems

Document and Paper
2
Copying
Blank paper comes out from the machine.
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Q Have you removed the plastic seal from the toner
cartridge?
A Make sure you remove the seal from the cartridge.
(See "Set Up the Machine, " in the Starter Guide.)
Q Is the toner cartridge installed properly?
A Make sure the toner cartridge is installed properly.
(See "Set Up the Machine, " in the Starter Guide.)
Q Is the cartridge out of toner?
A Replace the toner cartridge. (See "Replacing the Toner
Cartridge, " on p. 9-10.)
Back
Printout is too light or has uneven density.
Q Is the toner low or unevenly distributed?
A Redistribute the toner inside the toner cartridge. If
the problem persists, replace the toner cartridge. (See
"Replacing the Toner Cartridge, " on p. 9-10.)
Printout has vertical white streaks.
Q Is the toner low or unevenly distributed?
A Redistribute the toner inside the toner cartridge. If
the problem persists, replace the toner cartridge. (See
"Replacing the Toner Cartridge, " on p. 9-10.)
Printout is spotted or dirty.
A If the copy is spotted or dirty, clean the scanning
components and machine's interior (See "Cleaning the
Machine, " on p. 9-2.)
TOP
Previous Next
10-47