Masking The Pin - Muratec MFX-2530 Operating Instructions Manual

Advanced fax
Printing from security reception / Turning off security reception
When security reception is on, an incoming fax goes directly into your machine's
memory and the
MEMORY RECEIVE
To retrieve the faxes received during this security reception (and to return your
machine to normal reception until the next time):
1
Press , , [PrintDoc].
MENU M
The shows (see right):
LCD
2
Use the numeric keypad to enter the passcode.
3
Press [Enter].
• If you've entered the correct passcode, your
fax machine will print all documents in its
memory and then erase them. Then it will
turn security reception off until the next
time you've scheduled security reception.
• If you've entered an incorrect code, your fax machine will refuse to print,
and security reception remains on.
3.62
light comes on. But the fax has not been printed.
M.Security Rx
Enter protect passcode.
****
Security Rx will be OFF.
Masking the
To prevent unauthorized long-distance calls, some office telephone systems require
you to enter a personal identification number (
Your fax's mask feature helps you keep that
PIN
mask activated, you can dial a fax number plus a
a journal, error message printout, delayed command list or a
to eight characters in length. It also can include the * or # symbols, and it can be
entered from the numeric keypad.
There are three possible settings for the
• Off — Turns off the
play or printout which shows the number you dial.
• Mode 1 — Each remote fax unit has a departmental
• Mode 2 — Each fax user has a departmental
Enter
Note: If you select Mode 1 and you will use a one-touch or speed-dial number, you
must store the remote unit's
you select Mode 2, this isn't necessary. (See "Autodialing while using the
mask," next page for further details.)
Note: If you select either Mode 1 or Mode 2 and will be using batch transmission
(see pages 3.26–3.28), you must store the
within the appropriate batch box.
Activating the
Important: For this feature to work, you must have activated the passcode protec-
tion as described on page 3.61. You must also know the passcode.
1
Press ,
MENU J
The shows (see right):
LCD
2
Use the numeric keypad to enter the four-digit
passcode.
Note: If you enter an invalid passcode, the
machine's security feature rejects the
attempt and returns to standby mode.
3
Press [Enter].
4
Select desired mode.
5
Press [Enter].
6
Press to return to standby mode.
RESET
PIN
) whenever you dial long distance.
PIN
number private. With the
PIN
, but the
PIN
mask:
PIN
mask feature. Any you enter will appear on any dis-
PIN PIN
access code.
PIN
access code within that number. However, if
PIN
access code for the remote unit
PIN
mask
PIN
, 1, 6, [Enter].
PIN
will not appear in
PIN
. The may be up
TCR PIN
access code.
PIN
PIN
16.PIN mode
Enter protect passcode.
****
Enter
16.PIN mode
Use cursor to select
desired mode.
OFF
Mode1
Mode2
Enter