Control Panel - Muratec MFX-2530 Operating Instructions Manual

Getting started

Control panel

3
2
1
23 22
1
— Press to adjust the contrast level.
CONTRAST
2
—
RESOLUTION
In Fax mode:
RESOLUTION
Press to toggle among the three resolution modes and 256-level grayscale.
In Copy mode:
DOCUMENT
Press to toggle among
PHOTO
3
/ — Press this key to choose one of several preset
REDUCE ENLARGE
reduction/enlargement rates for copy or enlarge transmission. (See page 2.5
or 3.33 for more information.)
4
Liquid crystal display (
see what you're programming into the machine.
5
— Press to set the advanced futures or settings.
MENU
6
contrast volume — Use to adjust the contrast of the
LCD
7
Status lights
light — Glows when a problem occurs during fax communication,
ALARM
printing or scanning.
1.4
4
21
, / and .
PHOTO TEXT AUTO
) — Shows the machine's status and lets you
LCD
LCD
5 6 7 8
20 19 18 17 16
COMMUNICATION
another machine.
MEMORY RECEIVE
fax document into its electronic memory.
8
Numeric keypad — Just like the numeric keys on a regular tone-dialing
phone. Use these to dial phone and fax numbers and to enter numbers when
you're setting up the machine.
9
SPEED DIAL
pushing three of the keys on the numeric keypad. Also displays one-touch and
speed-dial entries sorted alphanumerically, as in a telephone directory.
10
JOB REVIEW
munication results, reserved printing jobs for the out-of-paper reception, or
reserved copy jobs. Also, press to cancel the fax commands.
11
INTERRUPT
.
12
Macro keys — Programming the Macro keys (
steps of the operation to a simple press of a key. You can "teach" the Macro
keys to carry out one of the several operations (see page 4.3).
9 10 12
11
15 14
light — Glows when the fax machine is communicating with
light — Glows when the machine is receiving an incoming
/ — Starts a speed-dialing operation, which you finish by
TEL INDEX
. — Press to review reserved fax commands, com-
& COMM CANCEL
— Press to interrupt the current printing job and make copies.
13
1 – 6) can reduce many
M M