Masking The Pin - Muratec F-320 Operating Instructions Manual

8
Press to save the setting.
ENTER
Note: After setting for activating the security reception, you can assign the secu-
rity reception to the Soft key (see page 3.15) to turn it on and off. Turning on
the security reception by pressing a Soft key is not effected the time setting
you entered at step 7. It begins the security reception immediately.
To turn the security reception on by pressing a soft key:
1
Program a Soft key for security reception. (See page 3.15.)
2
Press a Soft key that is assigned for security reception.
Enter Passcode :****
3
Enter the protection passcode and then press
The briefly shows following and the
LCD
security reception begins immediately.
** Sec. Rx Active **
Note: To turn the security reception off, see "Printing from security
reception/Turning off security reception," next column.
Printing from security reception / Turning off security reception
When security reception is on, an incoming fax goes directly into your machine's
memory and the light comes on. But the incoming fax message is
MEMORY RECEIVE
not printed.
To retrieve the faxes received during this security reception (and to return your
machine to normal reception until the next time):
1
Press , 4, 3, 4, .
MENU ENTER
If you using the Soft key, press the Soft key instead of this operation.
In which way, the shows:
LCD
Security Rx Doc.
Enter Passcode :****
2
Use the numeric keypad to enter the passcode.
3
Press .
ENTER
.
ENTER
of the Soft key will light and the
LED
• If you've entered the correct passcode, your fax machine will print all docu-
ments in its memory and then erase them. Then it will turn security
reception off until the next time you've scheduled security reception or the
Soft key which programmed security reception is pressed.
If you using the Soft key, the
• If you've entered an incorrect passcode, your fax machine will refuse to
print, and security reception remains on.
Masking the
PIN
To prevent unauthorized long-distance calls, some office telephone systems require
you to enter a personal identification number (
Your fax's mask feature helps you keep that
PIN
mask activated, you can dial a fax number plus a
a journal, error message printout, delayed command list or a
to eight characters in length. It also can include the * or # symbols, and it can be
entered from the numeric keypad.
There are three possible settings for the
• Off — Turns off the mask feature. Any
PIN
play or printout which shows the number you dial.
• Mode 1 — Each remote fax unit has a departmental
• Mode 2 — Each fax user has a departmental
Note: If you select Mode 1 and you will use a one-touch or speed-dial number, you
must store the remote unit's
you select Mode 2, this isn't necessary. (See "Autodialing while using the
mask," next column for further details.)
Note: If you select either Mode 1 or Mode 2 and will be using batch transmission
(see pages 3.11–3.13), you must store the
within the appropriate batch box.
Important: For this feature to work, you must have activated the passcode protec-
tion as described on page 3.42. You must also know the passcode.
Activating the mask
PIN
Important: For this feature to work, you must have activated the passcode protec-
tion as described on page 3.42. You must also know the passcode.
1
Press , 2, 2, 1, 3, . The
MENU ENTER
PIN Mode
Enter Passcode :****
Advanced features
light of the Soft key will be off.
LED
) whenever you dial long distance.
PIN
number private. With the
PIN
, but the will not appear in
PIN PIN
. The
TCR PIN
mask:
PIN
you enter will appear on any dis-
PIN
access code.
PIN
access code.
PIN
access code within that number. However, if
PIN
access code for the remote unit
PIN
shows:
LCD
PIN
may be up
PIN
3.43