If A Printout Jams - Muratec MFX-2530 Operating Instructions Manual

Just in case
If the platen cover is blinking on the
1
Open the platen cover.
2
Open the cover by holding the
ADF
3
Remove the original document from the
machine by turning the green dial
toward right or left.
CAUTION:
Be careful not to put your hand
under the platen cover and the
cover.
ADF
4
Confirm that any document does not remain in the
the cover and the platen cover.
ADF
5
Follow steps 6–7 on page 5.1.
5.2
:
LCD
Document jam
Open & Check
the blinking
cover.
cover release.
ADF
cover, and then close
ADF

If a printout jams

If a printout jam occurred during printing, an alarm sounds and the part the paper
jammed will blink on the . Please remove the jammed paper carefully as below.
LCD
CAUTION: The fuser unit becomes very hot. Do not touch the fuser unit
when you are removing a paper jam.
Important: Do not touch the electrical contacts
inside the printer cover or under the
drum cartridge, as an electrostatic dis-
charge may damage the machine.
When the paper jammed inside the machine
1
Open the printer cover by holding the
printer cover release (R ).
1
2
Open the fuser cover by pressing the
fuser cover release (R ).
2
CAUTION:
The fuser unit becomes very hot.
Do not touch the fuser unit
when you are removing a paper
jam.
Electrical Contacts