Using The Bypass Tray - Muratec MFX-2530 Operating Instructions Manual

Using the bypass tray

If you want to copy onto the transparency film, thick paper, envelopes or post cards,
use the bypass tray.
Note: Also, your machine's multi-purpose cassette (1st cassette) can hold these
papers.
Note: You can set the paper in the bypass tray with a length of 3.6 to 11.7 (91 to
297 mm) and width of 5.5 to 17 (140 to 432 mm).
Important: If loading transparency (OHP) film, be sure that the film does not
have paper backing and/or a leading strip. If it does, remove the paper
backing and/or strip before inserting.
1
Set the document in the or on the
ADF
2
Open the bypass tray.
3
Place a sheet of paper face down on the
bypass tray. Then align the paper guides
to the sheet's edges and insert the sheet
until it comes to a stop.
Note: You can place only one sheet on
the bypass tray at a time.
4
Press [Ppr.Size].
If you're using the standard type of paper (plain paper), skip to step 7.
Otherwise, proceed to step 5.
5
Press [Ppr.Type].
6
Select the paper type using the cursor key.
Then press [Enter].
.
FBS
Paper Size Select
Set paper type.
Plain
PasteBoard
OHP
Env./Post
Enter
7
Select the paper size.
When using the standard paper size:
(1) Select the paper size using the cursor key.
(2) Press [Enter].
When using the non standard paper size:
(1) Press [Other].
(2) Select the paper size using the cursor key.
(3) Press [Enter].
When using the special sized paper:
(1) Press [Other].
(2) Select "Custom" using the cursor key.
Note: You can register three types of special
size as you want.
(3) Press [Enter].
(4) Enter the horizontal and vertical size of the
paper using the numeric keypad.
Note: You can also enter the paper size using
and of the cursor key.
Note: To change Horizontal/Vertical, use
and of the cursor key.
(5) Press [Enter].
8
Press to begin the copying process.
START
Basic copy
Paper Size Select
Select paper size
in bypass tray.
Letter 11x17
Letter
H.LTR
H.LTR
Legal
Ppr.Type Other Enter
Paper Size Select
Select paper size
in bypass tray.
A3 B5
A4 A5
A4 A5
B4 Postcard
B5
A6
Ppr.Type Standard Enter
Paper Size Select
Select paper size
in bypass tray.
F4 Monarch
EX Custom1
EX
Custom2
DL Custom3
COM10
Ppr.Type Standard Enter
Paper Size Select
Move cursor and enter
value.
Paper range
10.0"
H. (5.5-17.0)
V. (3.6-11.7)
14.0"
Enter
2.7