Separate Each Received Document (Separator Page) - Muratec MFX-2530 Operating Instructions Manual

Separate each received document (Separator Page)

Your machine has a simple sorting feature. It can separate each received document
by inserting the separator page on the top of the received document.
For example, if you use the colored paper for the separator page, it is easy to see the
individual received document.
Note: You can assign the turning this feature on/off to a Soft Key. (See page 4.1.)
To set the Separator Page feature:
1
Press , , [Enter].
MENU J
2
Select "22. Separator Page" then press [Enter].
3
Select "Separator Page" then press [Enter].
Note: "Prt on Sep Page" will be gray unless
the Separator Page feature is turned
on.
4
To turn the Separator Page feature on, select
"ON" using the cursor key. Then press [Enter].
5
Select the paper source for the separator page
using the cursor key. Then press [Enter].
22.Separator Page
Use cursor to select
item.
Separator Page :OFF
Prt on Sep Page:OFF
Exit Enter
22.Separator Page
Use cursor to select
ON or OFF.
ON
OFF
▲ ▼ Enter
22.Separator Page
Use cursor to select
cassette.
1st Cassette
2nd Cassette
▲ ▼ Enter
6
Select "Prt on Sep Page" then press [Enter].
7
Determine if the separator page will be printed
with blank or not.
If you wish that the separator page will be
blank, select "OFF".
If you wish to print the first page of the
received documents on the separator page,
select "ON".
8
Press to save the settings.
ENTER
9
Press [Exit].
Press to finish.
RESET
Advanced fax
22.Separator Page
Use cursor to select
item.
Cassette :ON
Prt on Sep Page:OFF
Exit Enter
22.Separator Page
Use cursor to select
ON or OFF.
ON
OFF
▲ ▼ Enter
3.39