Mixed Length Transmission; Enlarge Transmission - Muratec MFX-2530 Operating Instructions Manual

Mixed length transmission

When you want to send the various sized documents with the
on.
Note: When you use the glass, you do not need to turn this on.
FBS
Acceptable document size
Acceptable document size for the mixed length transmission is as follows:
Half-letter , Letter , Legal
or
Letter , Ledger
To send mixed length documents:
1
Set your documents face up into the
2
Adjust the document guide to fit the docu-
ments.
3
Press .
MENU
4
Select "Mix Length" using the cursor key and
then press [Enter].
5
Adjust resolution, contrast and memory trans-
mission, if necessary.
6
Enter the fax number.
Also, enter any access codes necessary, just as you would for a regular phone
call. (Example: Enter 9 to "dial out" from an office telephone system, or 1 for
long-distance.)
7
Press .
START
Important: If you want to cancel a transmission while scanning the docu-
ment, press the
STOP
If you want to cancel a transmission in progress, use the Job
Review function. (See page 3.29.)
, turn this feature
ADF
.
ADF
Communication Options
Use cursor to select
item.
Delayed Tx Cont Polling
Batch Tx Fax & Copy
Polling
Duplex Tx
F-Code Tx
Mix Length
FCodePolling
Fax Set Mach Set Enter
key.

Enlarge transmission

You can transmit your document with enlarging.
Note: Enlargement is available only with the
Note: You can select a preset enlargement ratio, or directly enter the ratio using
the numeric keypad. Also, you can use cursor key to enter the ratio.
Note: You can enter the enlargement ratio from 100% through 400% in 1% steps.
Here's how:
1
Place the document on the glass and select resolution and contrast you
FBS
require.
2
Press , [EnlrgeTx].
NEXT
3
If you want to select area that will be enlarged,
proceed to step 4.
Otherwise, skip to step 5.
4
Press [ScanSize] then select scan size that
will be enlarged.
Then press [Enter].
Note: Refer to "Select scanning area to be
sent," page 3.2.
5
Enter enlargement ratio.
You can use the /
REDUCE ENLARGE
of the cursor key or numeric keypad to enter
enlargement ratio.
6
Press [Enter].
7
Enter the fax number and press
START
Advanced fax
.
FBS
Scan Size
Use cursor to select
scanning width.
Auto H.LTR
11x17 Letter
Legal H.LTR
Letter
Enter
EnlargeTx:
Set the enlarge ratio.
key, or
Doc.Size : Letter
Ratio : 100%
ScanSize Enter
.
3.33