Energy Saving - Muratec MFX-2530 Operating Instructions Manual

Trademarks
Muratec, the Muratec logo and all Muratec product names contained herein are
trademarks of Muratec America, Inc.
E S is a registered mark of the United States Environmental Protection
NERGY TAR
Agency.
Copyright
Copyright © 2001 by Muratec America, Inc, All rights reserved.
As an E
NERGY
mined that this product meets the E
energy efficiency.

Energy saving

Your machine can save the energy with its Energy Saving Mode.
In the Energy Saving Mode the printer will not use its fusing lamp. If your machine
receives a fax message or if any key is pressed your machine will automatically
wake up. The time for the machine to enter the Energy saving mode can be selected
from 1 to 240 minutes. For details, see "EasyStart," page 1.17.
Super G3 is an extension of Group 3 fax technology standards,
allowing the use of high-speed
transmission and high-speed protocols for rapid handshaking.
— Joint Bi-level Image experts Group, the new
JBIG
dard image data compression method. As
data more efficiently than
transmitting halftone (grayscale) image document.
This manual and any updates to it can be found online at www.muratec.com
Go to the "Products" section of this site, then click on "MFX-2530"
S ® partner, Muratec America, Inc., has deter-
TAR
S ®
NERGY TAR
- .34 modems for 33.6 Kbps
ITU T V
compresses the
JBIG
, it is especially effective when
MMR
guidelines for
- stan-
ITU T