Masking The Pin - Muratec F-360 Operating Instructions Manual

Advanced features
Masking the
PIN
To prevent unauthorized long-distance calls, some office telephone systems require
you to enter a personal identification number (
Your fax's mask feature helps you keep that
PIN
mask activated, you can dial a fax number plus a
a journal, error message printout, delayed command list or a
to eight characters in length. It also can include the * or # symbols, and it can be
entered from the numeric keypad.
There are three possible settings for the
• Off — Turns off the mask feature. Any
PIN
play or printout which shows the number you dial.
• Mode 1 — Each remote fax unit has a departmental
• Mode 2 — Each fax user has a departmental
Note: If you select Mode 1 and you will use a one-touch or speed-dial number, you
must store the remote unit's
you select Mode 2, this isn't necessary. (See "Autodialing while using the
mask," next column for further details.)
Note: If you select either Mode 1 or Mode 2 and will be using batch transmission
(see pages 3.12–3.14), you must store the
within the appropriate batch box.
Important: For this feature to work, you must have activated the passcode protec-
tion as described on page 3.46. You must also know the passcode.
Activating the mask
PIN
Important: For this feature to work, you must have activated the passcode protec-
tion as described on page 3.46. You must also know the passcode.
1
Press , 2, 2, 1, 4,
MENU ENTER
2
Use the numeric keypad to enter the four-digit passcode.
Note: If you enter an invalid passcode, the machine's security feature rejects
the attempt and returns to standby mode.
3.48
) whenever you dial long distance.
PIN
number private. With the
PIN
, but the will not appear in
PIN PIN
. The
TCR PIN
mask:
PIN
you enter will appear on any dis-
PIN
access code.
PIN
access code.
PIN
access code within that number. However, if
PIN
access code for the remote unit
PIN
. The shows:
LCD
3
Press
ENTER
PIN
may be up
4
Using the cursor key, select the mode you want.
5
Press
ENTER
Autodialing while using the
Note: The following instructions presume you understand how to set and use your
machine's autodialer. If you need to review, see pages 3.1–3.6.
If you chose "Mode 1" — the
In Mode 1, before autodialing a number for the first time, you must add the
PIN
the stored one-touch key or speed-dial number. Here's how:
1
Begin by creating or changing an entry in the autodialer. See pages 3.1–3.6 if
necessary. While you're setting this up, the machine asks you to enter the
2
Select "PIN :" and then press
3
Use the numeric keypad to enter the desired
length.
. The shows:
LCD
.
mask
PIN
goes in
PIN
. The
ENTER LCD
PIN
to
PIN
.
PIN
shows:
, up to eight characters in