Image rotate transmission
Default setting: ON.
When this feature is activated, if you set letter-sized document in the sideways
direction( ), the image will be sent rotated by 90°.
1
Press
,
, 0, 3, [Enter].
MENU
J
2
Choose desired setting you want using the cur-
sor key. Then press [Enter].
3
Press
to return to the standby mode.
RESET
Setting the confirmation stamp
Default setting: OFF.
You can set your fax machine so that it will automatically place a small blue ink
stamp mark on the front of each original document that it successfully scans.
Important: Turn off this feature if you're sending documents you don't want the
fax to stamp.
1
Press
,
, 1, 4, [Enter].
MENU
J
The
shows your fax's current setting:
LCD
2
Select "On" or "Off" using the cursor key.
3
Press [Enter] to save the setting.
4
Press
to return to the standby mode.
RESET
03.Image Rotate Tx
Use cursor to select
ON or OFF.
ON
OFF
Enter
14.Stamp
Use cursor to select
ON or OFF.
ON
OFF
Enter
Fax settings
3.71