Settings For Operation; Adjust The Monitor Speaker's Volume; Panel Auto Reset Time; Printing Your Fax Settings - Muratec MFX-2530 Operating Instructions Manual

Fax settings

Settings for operation

Adjust the monitor speaker's volume

Default setting: Medium.
You can set the volume of the monitor speaker, assuring that on-hook dialing will be
as loud (or as soft) as you require.
1
Press / on the control panel. You now should hear a dial tone.
MONITOR CALL
Important: If you don't hear a dial tone, make sure your fax machine is
plugged into a working phone line.
2
If the volume you hear is satisfactory, skip to step 4.
Otherwise, proceed to step 3.
3
Adjust the volume as you wish:
To turn the volume up, press .
To turns the volume down, press .
The LCD indicates the volume.
4
Press / again to hang up.
MONITOR CALL

Panel auto reset time

Note: Default: After three minutes
The machine returns to its initial condition automatically after a certain period of
time. You can change this time from 1 to 10 minutes.
Note: The machine first resets the
resets the key settings to the initial condition.
1
Press , , 1, 7, [Enter].
MENU J
2
Enter the time to auto resetting, and then
press [Enter] to save the setting.
3
Press to return to standby.
RESET
3.76
Tel Mode
Use cursor to adjust
monitor volume.
Volume Setting
OFF Low Medium
-----------------------
<- ->
display, and after certain period of time it
LCD
17.Fax Panel Reset
Fax Panel Reset
After 03 min.
Fax Panel Reset : 3 min.

Printing your fax settings

After you've programmed settings into your machine, print a fax settings list.
We recommend this, particularly if you're sharing the machine with other users,
who might change the settings.
With this list, you can quickly confirm that all of your settings are correct, without
having to go back and check them on the machine. Or, if you do need to undo
someone else's changes, this list guides you in returning the machine to your
preferred settings.
Note: Please refer to the index at the end of these instructions to locate any
settings you don't recognize or understand.
To print the settings list:
1
If the machine is in Fax mode, proceed to step 2.
If it is in Copy mode, press
2
Press ,
MENU J
Loud
Printing a program list
Enter
Your machine can also print a program list. This lists the functions available on your
fax machine and the keystrokes needed to complete them.
Note: Please refer to the index at the end of these instructions to locate any
settings you don't recognize or understand.
To print a program list, press
(1-10)
Enter
to change to Fax mode.
FAX
, [List].
, *, 8.
MENU