Cleaning The Fbs; If You Have Unsatisfactory Printout Quality - Muratec MFX-2530 Operating Instructions Manual

5
Open the inner cover.
Important: You must hold the cover open. It won't stay open by itself.
6
Use the cloth with the rollers cleaner to clean the face of the rollers. Rotate
the rollers by hand to allow cleaning of the entire roller surface.
7
Close the inner cover.
8
Close the cover, making sure both sides are snapped down securely.
ADF
9
Open the platen cover.
10
Use the cloth moistened with water to
clean the contact glass.
11
Close the platen cover.
Cleaning the
FBS
1
Open the platen cover.
2
Get a soft, lint-free cloth and moisten it with water.
Important: Make sure the cloth doesn't have any rough areas. Otherwise, it
could scratch the glass surface of the
3
Using the cloth, gently clean the glass
surface of the and the white back-
FBS
ground area on the underside of the
platen cover.

If you have unsatisfactory printout quality

Your machine automatically cleans its charger and transport roller, two items which
are very important to printout quality. So, if you notice poor printout quality
(whether on received faxes or on copies), it may mean that your machine requires
service. Review "Print quality problems" (pages 5.6–5.7), and see whether any of the
proposed solutions helps your machine. If none do, please call your authorized
Muratec dealer or call the Muratec Customer Support Center at (972) 364-3350.
Just in case
.
FBS
5.9