N. Department Codes - Muratec MFX-2530 Operating Instructions Manual

Common settings

N. Department codes

When the department code setting is activated, the machine reminds each user to
enter the department code before sending a document or making copies. With this
feature, the fax transaction time and the copy charge can be managed by depart-
ment.
After you turn on this setting, assign specific code to your office's machine users and
tell them to enter these department codes before sending faxes or making copies.
You will set the followings for the department code feature:
• Department code
• Department ID
• Department code setting (On or Off)
• Department code protection
• Department mode
• Copy charge setting
Entering a department code
Your machine can hold up to 100 separate department codes.
To enter a department code:
1
Press , [Mach Set],
MENU
The shows the department code list.
LCD
Note: If department code operation is pro-
tected (see page 4.13), the fax beeps
briefly and then returns to standby
mode. You will have to turn off the
protection first, then repeat this step.
2
Use the numeric keypad to enter the four-digit department code, 0000–9999.
If you want to erase an existing entry in the department code list, press
of the cursor key to select the number then press [Clear].
3
Press [Add] to entry in the department code list.
If you want to enter another department code, repeat steps 2–3.
4
Press [Enter] to save the setting. The machine will return to standby mode.
4.12
N.Department Codes
Enter department code.
, [Enter].
N
_
Add Clear
Entering a department name
You can enter a department name for each department number.
A department name may be up to 10 characters in length. You can send a fax or
make a copy with entering this department name instead of the four-digit depart-
ment code. (See "Select the department mode" on page 4.13.)
To enter a department name:
1
Press , [Mach Set],
MENU
2
Press [Dept.ID].
The shows the department code list.
LCD
3
Select the department code you want.
Note:
If you want to erase an existing depart-
ment ID, select it and press [Erase],
[Yes].
4
Press [Enter].
5
Use the one-touch keys or the numeric keypad
to enter the department ID. It may be up to 10
Enter
characters in length. Regarding entering char-
acters, see page 1.15.
Note: If you want to erase characters, press
[Clear].
or
Note: The lower case characters are not available here.
6
Press [Enter] to save the setting.
If you want to enter a department ID for another department code, repeat
steps 3–6.
To finish, press
Machine Settings
Use cursor to select
, .
N NEXT
item.
M.EnergySave ReleaseTime
N.Department Codes
Dept.ID
N.Department Codes
Use cursor to select
department code.
0010
0020
0030
0040
0050
N.Department Codes
Enter department ID.
_
0010
0020
0030
0040
0050
.
RESET
Erase Protect
Erase Enter
Clear Enter