Storing And Handling Toner Bottle - Muratec MFX-2530 Operating Instructions Manual

vi
Do not put furniture or equipment on
the power cord
Do not put anything on or over the electrical power
cord, and do not route the power cord under rugs or
carpets. Doing so can damage the power cord or fax,
and can cause fire or electrical shock.
Avoid temperature fluctuations
Sudden changes in temperature can cause damag-
ing condensation to form inside your machine.
Allow clearance around the outlet
Don't stack boxes or furniture around the outlet.
Use supplies manufactured
specifically for Muratec machines
Using toner cartridges and other supplies that are
not manufactured specifically for Muratec machines
may affect the operation of your unit.

Storing and handling toner bottle

To avoid damage to your machine and to assure the best performance possible, fol-
low these guidelines when storing and handling toner bottles:
Store the toner bottle
Store toner bottles at a constant temperature within a range of 50ºF to 95ºF (10ºC to
35ºC). Do not store bottles in locations subject to extreme fluctuation of
temperature and humidity.
Do not stand the bottle on its end and do not store it upside
down.
Do not open the protective bag of the bottle until you are
ready to install the bottle.
Do not store bottles in areas of:
• Direct sunlight
• Dusty conditions
• Near floppy disks or other computer media, computer screens, or any other mate-
rials sensitive to magnetic fields.
Do not burn toner bottles!
The toner powder is extremely flammable. Exposure to
flame can cause toner bottles to burn or explode, causing
serious injury.
Be careful not to get the toner powder in
your eyes.
If the toner powder gets in your eyes, wash your eyes well
and call a doctor.
Keep bottles away from water or oil.
Do not expose bottles to direct sunlight.
Do not expose toner bottles to static or
other electrical shock.