Image Repeat - Muratec MFX-2530 Operating Instructions Manual

12
If you want to change the layout, proceed to next step. Otherwise, skip to step
16.
Note: Use this function when you set the reduction/enlargement ratio by
yourself.
13
Press [Layout], the will show:
LCD
Note: If [Layout] is not appeared on the
press until it appears.
NEXT
14
Select the layout using the cursor key.
15
Press [Enter] to save the layout setting.
16
Press [Enter] to save the setting.
Note: If [Enter] is not appeared on the
Note: To cancel the setting of the combine function, press [Cancel].
The Combine icon will be displayed on the
17
Set the documents.
Note: Set the documents as you see on the
If you set your documents in the
Press . After the all documents in the
START
printed.
If you set your document on glass:
FBS
Press after set the first page of your documents on the
START
Then set the next page of your document, then press [Start].
After all your documents are scanned, press [Exit].
Combine
Use cursor to select
layout.
,
LCD
Layout
Mode
Mod1
Enter
, press .
LCD NEXT
Copy Ready
Set
Auto
.
LCD
Combine
Setting complete
Paper Zoom Sort
in step 3.
LCD
:
ADF
are scanned, the copies will be
ADF
glass.
FBS

Image Repeat

You can copy one document repeatedly 2, 4 or 8 times in one sheet.
2 repeats
Mod2
8 repeats
1
Note: In this mode, the reduce/enlarge ratio will be set to "Auto" (automatically).
If you want to set the reduction/enlargement ratio manually, set the ratio
after setting the repeat function.
Note: According to the size of document and recording paper you selected, a part
of the image might be lacked.
Note: When this function is available, the rotate copy is not available. Be careful of
the setting direction of the document.
Advanced copy
4 repeats
2.11