Basic Procedure - Muratec MFX-2530 Operating Instructions Manual

Basic copy

Basic procedure

1
Make sure the machine is in the Copy mode. To change to the Copy mode,
press .
COPY
2
Press to clear the previous setting, if necessary.
RESET
3
Set your document on
ADF
Note: See "How to set the document" on page 1.19 for details.
4
Set any settings you want.
5
If you want to make only one copy of each page of the document, skip to step
7. Otherwise, proceed to step 6.
6
Use the numeric keypad to enter the desired number of copies for each page
in your document. You can set up to 99 copies.
Note: To change the number entered, overwrite it with new number.
7
Press to begin the copying process.
START
Note: To stop the machine during multi-copying, press
Note: To return the machine to the initial condition after copying, press
Note: By default, your machine make a copy with the following conditions:
Document type: Auto
Image contrast: Auto
Paper selection: Auto
Reduce/Enlarge ratio: 100%
Note: If you do not operate the machine for a certain period after copying, the
machine returns to the initial display and after a certain period, it resets
the any setting to the default. This is called "Auto Reset". You can change
the auto reset time. See page 2.28.)
2.4
or glass.
FBS
.
STOP
.
RESET