C. Copy Protect; E. Sleep Mode - Muratec MFX-2530 Operating Instructions Manual

C. Copy protect

You can set your machine to not use the copy functions. When you set the copy pro-
tect to ON, the machine will not change to the copy mode even if you press
Note: If it is set to ON, the Fax & Copy feature (see page 3.34) and the setting of
the paper size are also not available.
1
Press , [Mach Set].
MENU
2
Select "C. Copy Protect" using the cursor key.
Then press [Enter].
3
Select "ON" or "OFF" using the cursor key. Then press [Enter].
Note: ON: The copy function is not available.
OFF: The copy function is available.
D. Soft Key
In the initial setting, the following functions are registered in the Soft keys; memory
transmission, transmission confirmation stamp, confirmation report and hook/call
request. When you want to set another function into the Soft key, you should set it
in the machine setting. Regarding the setting of the Soft key, see "Soft Key" on page
4.1.

E. Sleep mode

Your machine is initially set to be in the Sleep mode automatically when 15 minutes
. has passed after you pressed a key. If you want to change the time or to set the
COPY
Sleep mode to OFF, you can set it here.
Note: Pressing
Machine Settings
Use cursor to select
item.
A.Page Counter
B.Protect Passcode
C.Copy Protect
D.Soft Key
E.Sleep Mode
Enter
, your machine will be in the Sleep mode immedi-
ENERGY SAVING
ately, regardless of this setting.
1
Press , [Mach Set].
MENU
2
Select "E. Sleep Mode" using the cursor key.
Then press [Enter].
3
Select "ON" or "OFF" using the cursor key.
Then press [Enter].
Note: If you set the Sleep mode to OFF, the Auto power off mode will be also
OFF and your machine will return to standby mode.
4
Enter the time for the Sleep mode using
numeric keypad. (1 - 100 min.)
Note: Your machine will be in the Sleep mode
when the time you set has passed after
you pressed any key last.
5
Press [Enter].
Common settings
Machine Settings
Use cursor to select
item.
A.Page Counter
B.Protect Passcode
C.Copy Protect
D.Soft Key
E.Sleep Mode
Enter
E.Sleep Mode
Enter start time. (1-100)
After 015 min.
Enter
4.7