Directional Size (Inch) Magnification; Positive / Negative - Muratec MFX-2530 Operating Instructions Manual

Advanced Copy

Directional size (inch) magnification

The suitable magnification ratios will be automatically selected according to the
horizontal and vertical length of your document and copy image you entered.
Vertical
original size
Horizontal original size
Note: The range of size you can enter is 0.1 – 50.0 inches in 0.1 inch steps.
Note: If the calculated ratio is over than 400% or under than 25%, the ratio is set
with 100% automatically.
1
Press .
MENU
2
Select "D.Mag." using the cursor key and then press [Enter].
3
Press [Mag.inch].
4
Enter the horizontal size of your document
using the or of the cursor key or numeric
keypad. Then press of the cursor key.
5
Enter the vertical size of your document using
the or of the cursor key or numeric key-
pad. Then press of the cursor key.
6
Enter the horizontal size of the copy using the
or of the cursor key or numeric keypad. Then press
7
Enter the vertical size of the copy using the
numeric keypad.
Note: To change number you entered, press
enter new number.
8
Press [Enter] to save the setting. The D.Mag. icon will be displayed on the
.
LCD
9
Set your documents, then press
2.16
Vertical
copy size
Horizontal copy size
D.Mag.
Move cursor and enter
value. (0.1-50.0)
Mag.inch V. ---% H. ---%
11.0"
Doc.
8.5" 0.1"
D.Mag.% Cancel
of the cursor key.
or of the cursor key or
or of the cursor key, then
.
START

Positive / Negative

When this feature is turned on, black and white areas of your document will be
reversed.
Note: You cannot use this function with the Erase border function.
1
Press .
MENU
2
Select "Nega/Posi" using the cursor key and then press [Enter].
3
Press [Enter] to turn this feature On.
Note: If you want to turn this feature Off,
press [Cancel].
22.0"
Ppr.
4
The Reverse icon will be displayed on the
Enter
5
Set your documents, then press
Nega/Posi
Cancel
Copy Ready
. 100%
LCD
.
START
Nega/Posi
Setting complete
Paper Zoom
Enter
Set
1
Sort