Before Using Your Muratec Machine; Where To Set Up Your Machine - Muratec MFX-2530 Operating Instructions Manual

Before using your Muratec machine

Where to set up your machine

Follow these guidelines when setting up your machine:
50 - 95 F
iv
Away from direct sunlight
To avoid overheating, set up your machine away
from direct sunlight or a heater.
Level, and vibration-free
To avoid an injury or damage to the machine, set the
machine up in a level, vibration-free location.
Avoid extreme high / low temperature
Use your machine within the temperature range of
50ºF to 95ºF (10ºC to 35ºC).
Away from a television or radio
Many appliances and office equipment, including
televisions, radios, copy machines, air conditioners
and computers, can generate electronic noise that
can interfere with the operation of your machine.
Clean
Dust buildup can damage your machine.
Periodically clean your machine as described in the
operating instructions. Do not use a dust cover,
which can cause damaging overheating.
Near a phone jack
Your machine uses a standard (modular) telephone
jack, also known as an
40 cm
(15.7 inches)
22 cm
(8.7 inches)
10 cm
(3.9 inches)
10 cm
35 cm
(3.9 inches)
(13.8 inches)
-11.
RJ
Space around the machine
To ensure proper ventilation and easy
operation, set up the machine in an area
that meets the minimum requirements for
clearance as illustrated below.