Image Compression Mode; Cassette For Copying - Muratec MFX-2530 Operating Instructions Manual

05. Image Compression Mode

Default setting: NORM
You can compress the scanned image and store it in memory. When you select HIGH
in this setting, you can store more documents in the memory.
Note: When you select HIGH, the scanning speed will be slower.
1
Press , [Copy Set].
MENU
2
Select "E. User Settings" and then press [Enter].
3
Select "05. Image Compress Mode" and then
press [Enter].
4
Select the mode you want.
If you want to store more documents in the
memory, select HIGH.
If you want to make the scanned speed to be
faster, select NORM.
5
Press [Enter] to save the setting.
6
Press to return to standby.
RESET

06. Cassette for copying

Default setting: 1st cassette: ON, 2nd cassette: ON
If you do not want to use certain cassette for copying, set it to OFF.
User Settings
Use cursor to select
item.
01.Copy Scan Setting
02.Separator Line Width
03.Copy Panel Reset
04.CopyAgain Hold Time
05.Image Compress Mode
Enter
05.Image Compress Mode
Use cursor to select
item.
NORM: make copies faster
HIGH: fit more in memory
Enter
1
Press , [Copy Set].
MENU
2
Select "E. User Settings" and then press [Enter].
3
Select "06. Cassette for Copy" and then press
[Enter].
4
Select the cassette you want to set using the
cursor key and then press [Enter].
5
Select "ON" or "OFF" using the cursor key.
6
Press [Enter] to save the setting.
7
If you want to set other cassette, repeat step
4–6.
To finish, press [Exit].
Press to return to the standby mode.
RESET
Copy settings
User Settings
Use cursor to select
item.
06.Cassette for Copy
Enter
06.Cassette for Copy
Use cursor to select
cassette.
1st Cassette :ON
2nd Cassette :ON
Exit Enter
06.Cassette for Copy
Use cursor to select
ON or OFF.
ON
OFF
Enter
2.29