Installing / Changing The Printing Supplies - Muratec MFX-2530 Operating Instructions Manual

Getting started

Installing / Changing the printing supplies

Your machine prints incoming faxes and copies with a laser print engine. The
engine requires two types of printing supplies (sometimes also called consumables):
• The drum cartridge — It yields 74,000 normal letter-sized printouts (see
"Specifications," page .1). By "normal," we're referring to the amount of text
AI
and/or graphics on each page. This is based on an industry-standard test docu-
ment.
• The toner bottle — It yields 11,000 "normal", letter-sized printouts (see
"Specifications," page .1).
AI
Unpacking
1
Unpack the new drum cartridge from its car-
ton. Then remove the seal from the cartridge.
2
Remove the packing materials (securing tapes and sponge(rear)) from the
drum cartridge.
Tapes
1.12
Seal
Sponge
Installing / changing the drum cartridge
1
Pull up the printer cover release (R
and open the printer cover.
If you change the old drum cartridge
to the new one, proceed to step 2.
Otherwise, skip to step 3.
Important: Never touch the electrical contacts inside the printer cover and
under the drum cartridge, as an electrostatic discharge may
damage the machine.
2
Grasp the green handles and gently
pull out the old drum cartridge. Then
lift it out by the handle on top.
)
1
Electrical Contacts