Some Guidelines; Resolution, Grayscale And Contrast; Entering A Pause Character When Dialing - Muratec MFX-2530 Operating Instructions Manual

Some guidelines

Resolution, grayscale and contrast

Reviewing resolution and grayscale:
• Normal resolution is suitable for most typed documents and simple drawings.
• Fine resolution is ideal for maps, moderately complicated drawings, floorplans or
handwritten documents.
• Superfine resolution (" - " on the control panel) reproduces the detail of
S FINE
extremely complicated drawings or line art.
• Grayscale mode (" " on the control panel; "Gray" on the
HALFTONE
shades in photos and drawings.
Note: If you send a fax in superfine, certain fax models (especially older, non-
Muratec models) receive it only in fine mode. However, you can send a fax in
grayscale mode to virtually any fax machine currently in use.
To change the resolution setting, press
A glowing indicates the machine is using the setting named by
LED
that .
LED
Reviewing contrast:
Setting the contrast allows you to compensate for any excessive lightness or dark-
ness, as the case may be, of document pages you are sending or copying.
Pressing to select the contrast mode:
CONTRAST
– Darkens weak, "washed-out" images.
DARK
= – Provides some darkening of documents.
– Suited to most documents.
NORMAL
= – Provides some lightening of documents.
– Lightens up overly dark documents.
LIGHT
– This mode automatically set the suitable setting
AUTO
according to the document density.
Note: You can set the primary mode of the resolution and contrast. (See page
3.69.)
Mixing resolution and contrast in a multiple page
When you send the document with more than one page, you can select different res-
olutions and contrasts for each page.
Place your document, select resolution and contrast for first page, dial and press
START
When the document is placed in the
) captures
LCD
When the document is placed on the
repeatedly.
RESOLUTION

Entering a pause character when dialing

Some long-distance systems require dialing pauses, and pauses can also be useful
when you're dialing through special telephone exchanges.
When you are dialing or storing the autodialer, and you want to insert a pause char-
acter, press
[Pause] after you've dialed at least one other character. -/ (the pause character)
will appear on the
Each pause entered lasts for a factory-set two seconds.
For example, if the pause is at the factory setting, pressing 9,
19725552009 dials 9 [2-second pause] 1 9 7 2 5 5 5 2 0 0 9.
Note: Each pause uses two of the characters you're allowed in a number.
Note: To change the dialing pause length, see "Changing the pause length" on
. Then follow one of the following two procedures.
ADF
Select resolution and contrast before the next page is scanned.
FBS
1
Remove the previous page and place the next page.
2
Select resolution and contrast. Then press
until the [Pause] is appeared on lower part of the
NEXT
.
LCD
page 3.75.
Basic fax
glass
.
START
, then press
LCD
, [Pause],
NEXT
3.1