Table of Contents
Advertisement
SP MODE SETTING
1.2 SP MODE SETTING
After installing the machine and line adapter, set SP5-816-000 [RDS On/Off] to 1.
Check and set the value of the following SP modes. Ensure they are set correctly.
• SP5-501-000 [Set PM Counter]: 60000 developments (Default)
• SP5-504-000 [Jam Alarm Level]: 3=1000 sheets (Default)
• SP5-505-000 [SC Alarm Level]: 10=1000 sheets (Default)
• SP5-507 [Supply Alarm Level]: Specifies whether the following supply call is
-001 [Toner End]: 0= No (Default), 1= Yes
-002 [Count of Copy]: 0= No (Default), 1= Yes
-003 [Staple]: 0= No (Default), 1= Yes
-131 [A2]: 1000 sheets (Default) (Set the counter value for the alarm.)
-132 [A3]: 1000 sheets (Default)
-133 [A4]: 1000 sheets (Default)
-134 [A5]: 1000 sheets (Default)
-140 [B3]: 1000 sheets (Default)
-141 [B4]: 1000 sheets (Default)
-142 [B5]: 1000 sheets (Default)
-143 [B6]: 1000 sheets (Default)
-160 [DLT]: 1000 sheets (Default)
-164 [LG]: 1000 sheets (Default)
-166 [LT]: 1000 sheets (Default)
• SP5-508-000 [CC Auto Call On/Off]: 1 = On (Default), 0 = off
• SP5-812-000 [Service Tel. No.]
performed or not.
When the size counter becomes the following
setting values (from SP5-507-131 to 166), the
machine sends an alarm to the center.
Set service engineer phone number
2
31 March, 1999
Advertisement
Table of Contents
