SP TABLE
Item
SP No.
[Display]
6. Peripherals [Pheriphs]
06-006: ADF registration adjustment [ADF Regist]
06-006-01
Main scan
[Horizontal]
06-006-02
Non-switchback (thin original), front
side
[Thin Paper]
06-006-03
Switchback (thick original), front side
[Thick Paper]
06-006-04
Switchback (thick original), back side
[2 sided]
06-102: [Sort/Stack Limit]
06-102-00
[0: No limitation, 1: Limitation]
06-104: Stapling Limit [Staple Sheet Limit]
06-104-00
[Staple Sheet Limit]
06-107: [Sorter Free Run]
[Sorter Free Run]
06-107-00
Default
Value Range
Step
Value
0 mm
-3.0 to 3.0 mm
0.1
0 step
-15 to 15 steps
1
0 step
-15 to 15 steps
1
0 step
-15 to 15 steps
1
1
0 to 1
1
1
0 to 1
1
0
0 to 1
1
50
SP7-
Description
902/3
Original scanning position adjustment when using the
ADF. See the ARDF manual for how to use these SP
modes.
Enables or disables the limitation on the number of
sheets that can be stacked in the sorter. 0: Disabled;
1: Enabled (default). This limit can be disabled if the
user requests, but the user has to make sure that
jams do not occur.
Enables or disables the limitation on the number of
sheets that can be stapled. 0: Disabled; 1: Enabled
(default)This limit can be disabled if the user
requests, but the user has to make sure that jams do
not occur.
Sorter free run
24 February, 1999