Table of Contents
Advertisement
24 February, 1999
4. Paper feed speed
There are SP modes to adjust the current used for different paper types, such
as OHP or thick paper.
5. Duplex mode: For the front and back sides of the paper
There are SP modes to adjust the current used for the front and back sides of
the paper.
6. Copy mode or printer mode
There are SP modes to adjust the current used for these two modes.
SP2-310 (Set Paper Transfer Bias) sets the paper transfer bias values.
SP3-313 to 2-315: Corrections for paper type, paper size, leading edge, and
trailing edge
SC450 (paper transfer bias power supply error)
SC495 (temperature sensor error)
SC496 (humidity sensor error)
A259D413.WMF
2-89
TRANSFER BELT UNIT
Advertisement
Table of Contents
