Table of Contents
Advertisement
FILM PROJECTOR UNIT (A846)
3.10.2 INSTALLAITON
ø
CAUTION
Unplug the copier power cord before starting the following procedure.
NOTE: The film projector table (A702-19) must be installed before starting the
following procedure.
1. Place the projector unit [A] on the table by aligning the holes in the projector
base plate with the positioning pins [B]. Then secure the projector unit with five
M3 x 12 screws.
[B]
A846I509.WMF
3-48
24 February, 1999
[A]
Advertisement
Table of Contents
