Table of Contents
Advertisement
DEVELOPMENT UNIT
[A]
A259R303.WMF
5. Remove the developer cover [A] (2 screws).
6. Hold the development unit upside down in the developer collection bag, then
rotate the sleeve in the forward direction [B] to collect the developer.
NOTE: When rotating the sleeve in the forward direction, keep the sleeve side
facing up so that the developer will not be scooped up onto the sleeve.
7. Repeat the forward rotation/collection cycle until developer does not appear on
the sleeve.
8. Rotate the sleeve in the opposite direction, then hold the development unit
upside down again to collect the developer attached to the sleeve surface.
6-42
24 February, 1999
[B]
A259R307.WMF
Advertisement
Table of Contents
