CONTROLLER INTERFACE TYPE E (A848)
[B]
20. Secure the I/F unit [A] to the copier (3 screws, 1 screw with washer [B]).
21. Install the printer controller [C] in the I/F unit [A]. (4 screws)
22. Reinstall the operation panel (2 screws), the right cover (1 screw), and rear
right cover (1 screw).
23. Install the I/F cover [D] (4 screws).
24. Reinstall the lower rear cover (3 screws).
NOTE: When the machine is equipped with an ARDF, install the clamp from the
interface kit accessories on the top of the interface cover [D] to prevent the
fibre optic cable from being cut.
[A]
A848I510.WMF
[D]
3-58
24 February, 1999
[A]
A848I509.WMF
[C]