Ricoh Aficio Color 3006 Service Manual page 351

DUPLEX UNIT
[B]
[A]
6. Disconnect the connector [A] of the duplex feed motor [B].
7. Close the side fences [C] and remove the duplex feed assembly [D] (5 screws).
8. Remove the duplex feed motor assembly (3 screws).
9. Replace the duplex feed motor (2 screws).
NOTE: 1) When installing the duplex feed assembly [D] on the base unit, place the
bottom plate [F], with the mylar strip [E], over the bracket tabs [G].
2) Ensure the base unit's mylar strip [H] is placed against the guide plate
[I], as shown. It must not go under the guide plate.
[D]
[C]
[D]
[H]
[G]
[E]
[F]
6-80
[H]
A259R575.WMF
[C]
24 February, 1999
[I]
[G]
[E]
A259R577.WMF