Table of Contents
Advertisement
USER TOOL
Menu
3 Side Full
When this mode is off, narrow margins on all 4 sides of the original
Bleed
are not copied.
When you turn it on, margins 1, 2 and 3 are copied.
Note
Bypass
You can register the non-standard size paper when you make copies
Custom Size
with the bypass tray.
1. Select [Custom1], [Custom2], or [Custom3] with the ü û
2. Press the [OK] key.
3. Enter the vertical size with the [Number] keys, then press the [#]
4. Enter the horizontal size with the [Number] keys, then press the
Note
Key Operator Tools
Use these tools to manage use of the machine.
Note
Enter a previously registered key operator code with the [Number] keys.
Key Op.
If you select "On", only operators who know the key operator code can
Access
access the "Key Operator Tools" in the System Settings and Copy
Features.
Note
1
4
3
Default: Off
You cannot cancel the leading edge margin (margin 4).
keys.
key.
[OK] key.
Adjustment value:
Metric version: Vertical: 100 - 305mm
Horizontal: 140 - 457mm
Inch version:
Vertical: 3.9" - 12.0"
Horizontal: 5.5" - 18.0"
To clear the custom paper size, select the [Delete] key.
Default: Off
If you select "On", you should register the key operator code.
Description
2
A259M500.WMF
4-14
24 February, 1999
1: 2±2mm, 0.08"±0.08"
2: 2±2/–1.5mm,
0.08"+0.08"/–0.06"
3: 2±2mm, 0.08"±0.08"
4: 5±2mm, 0.2"±0.08"
Advertisement
Table of Contents
