Table of Contents
Advertisement
SP TABLE
Item
SP No.
[Display]
02-310: Paper transfer bias setup [Belt transfer bias]
02-310-01
Paper transfer forced environment
switchover
[Paper transfer bias]
02-310-02
Image area: Normal paper: 1C
[NRML 1C]
02-310-03
Image area: Normal paper: 2C
[NRML 2C]
02-310-04
Image area: Normal paper: 4C
[NRML 3C]
02-310-05
Image area: Normal paper: 1C
[NRML 4C]
02-310-06
Image area: Thick paper: 1C
[THICK 1C]
02-310-07
Image area: Thick paper: 2C
[THICK 2C]
02-310-08
Image area: Thick paper: 3C
[THICK 3C]
02-310-09
Image area: Thick paper: 4C
[THICK 4C]
02-310-10
Image area: OHP:1C
[OHP 1C]
02-310-11
Image area: OHP:2C
[OHP 2C]
Default
Value Range
Step
Value
1
0 to 3
1
7 µA
1 to 50 µA
1
15 µA
1 to 50 µA
1
15 µA
1 to 50 µA
1
15 µA
1 to 50 µA
1
8 µA
1 to 50 µA
1
10 µA
1 to 50 µA
1
10 µA
1 to 50 µA
1
10 µA
1 to 50 µA
1
7 µA
1 to 50 µA
1
10 µA
1 to 50 µA
1
12
SP7-
Description
902/3
Specifies whether the transfer bias is to be switched
according to the detected value from the humidity
sensor, or whether it is to stay fixed at the values for
normal or low humidity (these values depend on the
settings of SP2-316).
0: No environment switching, kept at standard
conditions
1: Conditions depend on the sensor (default)
2: No environment switching, kept at low humidity
conditions
3: No environment switching, kept at high humidity
conditions
Yes
Adjusts the paper transfer belt bias for various paper
types and modes.
Yes
3C mode: Used in twin colour modes (Bk/R, Bk/G, or
Bk/B)
Yes
Adjust only if there are problems with insufficient
Yes
transfer in the image area of the copy for a particular
paper type or mode, or in response to field problems
Yes
as directed by technical support staff.
Yes
Yes
Yes
Yes
Yes
24 February, 1999
Advertisement
Table of Contents
