Table of Contents
Advertisement
SP TABLE
Item
SP No.
[Display]
02-316-28
[High-Hum NRML_2/3 4C]
02-316-29
[High-Hum NRML Back 1C]
02-316-30
[High-Hum NRML Back 4C]
02-316-31
[High-Hum NRML THICK Back 1C]
02-316-32
[High-Hum NRML THICK Back 4C]
02-316-33
[High-Hum NRML_2/3 Back 1C]
02-316-34
[High-Hum NRML_2/3 Back 4C]
02-912: Temperature and Humidity Display:[Temperature Display]
02-912-01
[Temperature]
02-912-02
[Humidity]
02-913: Used toner sensor presence/absence [Toner Overflow Sensor]
[1:Sensor On, 0: Sensor Off]
02-913-00
02-920: Resolution: Printer Mode, Test Patterns only [Resolution: Printer Mode]
02-920-00
Printer mode resolution
[0: 400dpi, 1: 600dpi]
02-951: [Toner End Detection]
[0: Detection, 1: No Detection]
02-951-00
02-953: Maximum supply ratio [Max Toner Recovery Ratio]
02-953-01
[K]
02-953-02
[Color]
Default
Value Range
Step
Value
100
10 to 400
100
10 to 400
100
10 to 400
100
10 to 400
100
10 to 400
100
10 to 400
100
10 to 400
0,1
0,1
0: No sensor
1
1: Sensor
present
0
0 to 1
0
0: Detected
1
1: Not detected
100%
0 to 100%
1
100%
0 to 100%
1
20
SP7-
Description
902/3
Corrects the paper transfer belt bias for the type of
paper and copy mode depending on the humidity.
Adjust if there are transfer problems for all modes in
a certain humidity condition.
These settings are used in conjunction with SP 2-
310-1.
2/3 speed: Printer mode
Displays the temperature currently detected by the
temperature sensor.
Displays the relative humidity currently detected by
the humidity sensor.
Sets the presence or absence of the used toner
Yes
sensor.
Set this to 1 to generate the 600 DPI test patterns for
the printer. 0 = 400 DPI (default); 1 = 600 DPI
Enables/disables the toner end detection function for
all colors.
Note: Reenter 0 after temporarily resetting this mode.
Adjusts the maximum toner supply ratio in the fuzzy
supply mode.
24 February, 1999
Advertisement
Table of Contents
