USER TOOL
Menu
Accessible
Modes
Counter Reset
Clear Code &
Counter
You can assign user codes to each color mode. Operators must
input their user codes before using each color mode (Full Color,
Black, Single Color, and Twin Color). The machine keeps count of
the number of copies made under each user code.
1. Select your desired color mode with the ü û keys.
2. Press the [Select] key.
3. Press the [Exit] key .
Note
Repeat steps 1 and 2 until you finished designating color modes.
You can check the number of copies made using each user code.
Also, you can clear each code's counter.
1. Input user code you want to check its number of copies with
the [Number] keys.
2. Press the [OK] key.
Note
You can check the number of copies.
To clear the counter, press the [Reset] key. Then press the
[Yes] key.
3. Press the [Exit] key .
You can reset the counter for all user codes and delete all user
codes.
1. Select [User Code] to delete all user codes or [Counter] to
reset the counter for all user codes with the keys.
2. Press the [Yes] key.
3.
Press the [Exit] key.
Description
4-18
24 February, 1999