Table of Contents
Advertisement
24 February, 1999
[A]
[B]
6. Install the sorter stapler [A] on the frame (2 hinge pins at the rear), as shown.
7. Tighten the M4 x 20 screw [B].
NOTE: This screw prevents the sorter stapler from falling down.
8. Connect the cable [C] and the optic cable [D].
9. Install the chain [E] as shown.
10. Attach the staple position decal [F], as shown.
11. Plug in the copier.
12. Turn on the main switch of the copier and test the operation of the sorter
stapler.
NOTE: The copier automatically recognizes that the sorter stapler has been
installed.
A834I505.WMF
[C]
[D]
[E]
3-35
20-BIN SORTER STAPLER (A834)
A834I507.WMF
A834I506.WMF
[F]
Advertisement
Table of Contents
