Table of Contents
Advertisement
PAPER TRAY UNIT (A832/A833)
[A]
9. Attach the support brackets [A] to the bottom of the paper tray unit as shown (4
screws).
ø
CAUTION
If you do not attach the support brackets, the machine may fall forwards
when the paper trays are pulled open.
10. Pull out the paper tray and load paper into it. (The paper size and direction for
each tray should be designated by the customer.) Position the side and rear
fences properly.
11. Turn on the main switch.
12. Enter the proper paper size for each tray by following the procedure in the
copier's manual.
13. Attach the appropriate tray decals [B] which are included in the accessory box
with the main copier.
A832I508.WMF
[B]
3-26
24 February, 1999
A832I509.WMF
Advertisement
Table of Contents
