Table of Contents
Advertisement
24 February, 1999
Menu
Tray Paper
Select the size of the copy paper set in the paper tray.
Size
Note
in the paper tray, a paper misfeed might occur because the paper size
is not detected correctly.
Reference
You can select the paper tray which will be selected as a default in the
following conditions:
• When the main power switch or operation switch is turned on.
• When System Reset or Auto Reset mode is turned on.
• When the [Clear Modes] key is pressed.
• ·When the Auto
Note
Auto Tray
If you load paper of the same size in two or more trays, the machine
Switch
auto-matically shifts another tray when the tray in use runs out of
paper. You can set or cancel this setting.
Note
Interleave
By default, you can make the interrupt copies. You can cancel this
Print
setting.
Note
Output Tray
You can specify a bin to which documents are delivered for each
Prio. (For 3-bin
feature (copy and printer).
1. Select [Copy] or [Printer] with the ü ûkeys. Then press the
sorter only)
2. Select a bin with the ü û keys. Then press the [OK] key.
Note
Display
You can adjust the brightness of the panel display.
Contrast
Note
If the specified paper size differs from the size of paper actually set
Paper Select mode is not selected.
Default: Tray 1
Tray 2, Tray 3, and Tray 4 are options.
Default: Off
Default: On
[OK] key.
Default:
Copy: First bin
Printer: First bin
Default: level 4
Description
4-13
USER TOOL
Advertisement
Table of Contents
