Ricoh Aficio Color 3006 Service Manual page 411

SP TABLE
Item
SP No.
[Display]
05. Operation mode/system [Mode]
05-001-00 Operation panel all on
[0: OFF, 1: ON]
05-009-01 Display language setup
[Disp Language]
Millimeter/inch selection
05-009-02
[mm or inchi]
05-104: [A3/DTL Double Count]
[A3/DTL Double Count]
05-104-00
05-113-00 Key card/coin lock installation
[Key Card / Coin Lock]
05-114-00 Account color mode setup
[Color Mode Selection: Key Card]
Default
Value Range Step
Value
0 0 to 1 1
0 0 to 15 1
0 0 to 1 1
0 0 to 1 1
0 0 to 3 1
F 1 to F
42
SP7-
Description
902/3
Turns on all the indicators to test the operation panel
display functions. 0 = Normal display; 1 = All on
Defines the display language.
0 = Japanese; = 1 English; 2 = French; 3 = German;
4 = Spanish; 5 = Italian, etc (the others are listed in
the Installation section of the manual).
Selects metric or inches.
0 = metric
1 = inches
This affects the available magnification ratios and the
unit that is displayed when inputting values for
directional size magnification. Available paper sizes
and other features are not affected.
Specifies whether the counter is doubled for A3/DLT
size paper.
0 = Normal count, 1 = Double count
Specifies whether the key counter, key card, or coin
lock is installed or not.
0 = None (default)
1 = Key card (used in Japan only)
2 = Key counter
3 = Coin lock (used in Japan only)
Bit 0 = 1: Managed in black mode
Bit 1 = 1: Managed in single colour mode
Bit 2 = 1: Managed in two colour mode
Bit 3 = 1: Managed in full colour mode
Used in Japan only.
24 February, 1999