Table of Contents
Advertisement
SP TABLE
Item
SP No.
[Display]
4. Scanner
04-008: Sub-scan Magnification [Subscan Magnification]
04-008-00
Scanner sub-scan magnification
adjustment
[Subscan Magnification]
04-010: Scanner leading edge registration adjustment [Lead Edge Regist: Scanning]
[Lead Edge Regist: Scanning]
04-010-00
04-011: Scanner side-to-side registration adjustment [Sd to Sd Regist: Scanng]
04-011-00
[Side to Side Regist: Scanning]
04-012: Scanner blank margin adjustment [Blnk Mrgn]
04-012-01
[Rear]
04-012-02
[Front]
04-012-03
[Left]
04-012-04
[Right]
04-013: Scanner free run [Scanner Free Run]
04-013-01
Lamp on
[Lamp ON]
04-013-02
Lamp off
[Lamp OFF]
04-301: APS operation test [Scanner Free Run]
04-301-00
APS operation test: Size display
[APS Data Confirmation]
Default
Value Range
Step
Value
0%
-1.0 to 1.0%
0.1
0 mm
-5.0 to 5.0 mm
0.1
0 mm
-6.0 to 6.0 mm
0.1
0 mm
0 to 3.0 mm
0.1
0 mm
0 to 3.0 mm
0.1
0 mm
0 to 3.0 mm
0.1
0 mm
0 to 3.0 mm
0.1
1: Start
0: Stop
to
26
SP7-
Description
902/3
Yes
Adjusts the magnification of the scanned image in the
feed direction. This adjusts the scanner motor speed.
Yes
Adjusts the leading edge registration by changing the
laser exposure start timing in the sub-scan direction.
Yes
Adjusts the side-to-side registration by changing the
laser exposure start timing in the main scan direction.
Sets the blank margin at each side for erasing the
original shadow caused by the gap between the
original and scale..
Repeats the reciprocal movement of the carriage on
the scanner alone. The speed is for 100%.
Shows the width of the original detected by the
original width and length sensors.
24 February, 1999
Advertisement
Table of Contents
