Polaris 850 MATRYX INDY XC 129 2021 Manual page 663

4. Install the display wire cover
using the bottom two display fasteners
fasteners to specification.
NOTICE
Make sure the tab of the display wire cover is installed
into the holder on the back of the display door.
TORQUE
Display Fasteners:
53 in-lbs (6 N·m)
a
5. Close the display door and flip the hood over.
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
i
onto the display door 6. Install edge clip or new cable tie
o
. Torque
7. Reinstall the hood and side panels.
BATTERY / ELECTRICAL
hood harness to the tab on the display wire cover.
s
to secure the
10
10.57